Site icon Canemu Adblue Emulators NOX Emulators

What Adblue emulator options are available for DAF trucks?

Can Logic Ltd has researched, developed and can offer a wide range of adblue emulators suitable for DAF trucks. Our can smart DAF scr emulator is very easy and quick to install, normally it should take about 30-40 minutes on euro 5 models. This emulator will disconnect and fully emulate every single component with the SCR system as well as both nox sensors. Your adblue gauge will show the reading, there will be no warning lights related to SCR or Nox systems and your vehicle will never go into limp mode be course of SCR or NOX problem ever again. Your vehicle will also use no urea liquid providing you with further saving.

Can Logic smart DAF emulator is suitable for the following vehicles:

DAF XF105 EURO 5
DAF CF85 EURO 5
DAF CF75 EURO 5
DAF CF65 EURO 5 (PACCAR ENGINES ONLY)

Our second emulator in our DAF family is a very special device developed for DAF trucks run by CUMMINS engines. This is completely different emulator to the one discussed above and should never be confused. Emulator suitable for standard XF or CF models will not work on DAF vehicles with CUMMINS engines.
Can smart CUMMINS emulator will disconnect SCR and NOX systems fully and accurately emulate the signals to ECU. It is one of the best CUMMINS solutions available on the market today.
Apart from DAF CUMMINS vehicles, our Can smart cummins emulator is suitable for array of other vehicles powered by CUMMINS including, but not limited to, the following:

DAF LF 45 EURO 5
DAF LF55 EURO 5
DAF CF55 EURO 5
DAF CF65 EURO 5 (CUMMINS ENGINES ONLY)
AVIA EURO 5
FOTON AUMAN EURO 5
YUTONG EURO 5
SANY EURO 5
SOLBUS EURO 5
OTOKAR EURO 5
AUTOSAN EURO 5 (CUMMINS ENGINES ONLY)
SOLARIS URBINO 10
KAMAZ, MAZ, PAZ, GAZ EURO 5 (CUMMINS ENGINES ONLY)

And other CUMMINS powered EURO 5 heavy goods/passenger vehicles. Please get in touch with your vehicle details to confirm possibilities.

Another DAF family member is Can Logic DAF NOX emulator. This option allows you to replace faulty nox emulator by replacing it with nox emulator, but leaing SCR system as is. This means your adblue system will be working as before, without any changes, but your nox sensors will be disconnected and emulated by our emulator. Installing nox emulator is relatively easy. You must remove nox sensor from the vehicle, open the metal box where electronic board is stored and replace it with our emulator. The trickiest part is to open the box, as it is sealed in. We recommend using a heath gun to soften the sealant after which the lid will come up easily. It is also of utmost importance to make sure the box is re-sealed properly after replacing the boards and no water can get in to it.
The great thing about our DAF nox emulator is that you only need to fit one to emulate both nox sensors. So even if both nox sensors are faulty, you still need only one emulator installed to fix both issues.

Lastly, lets talk about DAF EURO 6 SCR and NOX disconnection options and available solutions. DAF introduced certain upgrades to its software last year, which upgraded SCR system and made it very difficult to disconnect with the help of the emulator. In short, this DAF software update left all emulators that have, up until then, worked perfectly incapable of disconnecting and emulating SCR system. So if your vehicle had not been connected to diagnostics in the last couple of years, there still might be an emulator out there, which will work on it. However, if this last update has already been applied to your vehicle, no emulator in the world will do the job. For now at least..:) The only solid solutions available for DAF EURO 6 vehicles is to remove adblue by modifying ECU file. File should be downloaded with tools such as KESS or K-TAG, modified and uploaded back. No equipment needs to be installed to the vehicle at all.

Should you be in possession of the above tools and would like us to modify file for you, please get in touch to confirm possibilities.